Home » Areas Served » St. Augustine
When somebody shows up to handle electrical work at your home or property in St. Augustine, the first thing that happens is a conversation. What is the symptom, how long has it been going on, and what has changed recently in the house. That conversation shapes everything that follows, and it starts before any tools come out. The work gets scoped, the price gets confirmed, and you decide whether to move forward. Nothing is scheduled until you know what you are agreeing to.
We cover electrical repair and installation across St. Augustine and the surrounding communities in St. Johns County. The work ranges from a single dead outlet to a full panel replacement, and the process is the same either way.
A call to (904) 289-4264 is where it starts.
Booking is handled by phone. You describe what is happening, we talk through the job, and you get a price before anything is confirmed. If the work is straightforward, most calls take a few minutes to scope. If the situation is more involved, we ask enough questions to give you an accurate picture before anyone shows up.
We are available every day from 6:00 AM to 10:30 PM. That window covers most situations, including the ones that feel urgent at the end of the day.
A fault that affects safety does not get put on a routine schedule. Burning smells, repeated sparking, a section of the house with no power, a breaker that will not stay reset: these get treated as priorities. Call and describe what is happening, and we assess what the schedule can accommodate.
For a rental or a small business that cannot go dark during work, we talk through access and timing on the call. The scope is confirmed before the visit so the work is focused when we arrive. A property manager or landlord who needs documentation of what was done and what was found gets that from us as a matter of course.
A detached garage or workshop that draws real power needs more than a long extension cord. A subpanel fed from the main panel gives the space its own breakers, its own circuits, and the capacity to run tools, lighting, and outlets without loading down the house. We handle the feeder circuit, the subpanel installation, and the circuit work inside the space. If the main panel does not have the capacity to support the addition, we flag that before the work starts.
An inspection is worth scheduling before purchasing an older property, before a rental is listed, or when wiring has not been looked at in years. We go through the panel, the branch circuits, the grounding and bonding, and the outlet protection throughout the house. The result is a clear picture of what is working, what needs attention, and what can wait. For landlords and property managers, that report is also a record.
Recessed lighting, ceiling fans, under-cabinet fixtures, and replacement fixtures all fall into this category. If a ceiling box is not fan-rated and a fan is going in, the box gets replaced before the fan is hung. If there is no switch leg for a new ceiling fixture, we run one. The work is sized to what the circuit can carry.
A dryer, a range, a refrigerator, or a dishwasher that keeps tripping a shared circuit is telling you the circuit is not sized for the load. A dedicated circuit run from the panel fixes that. We also run dedicated circuits for EV chargers, which require a 240-volt circuit sized for the charger's output. Before any of that work starts, we check whether the panel has the capacity to carry it. If it does not, we explain what an upgrade would involve.
A panel where half the breakers are labeled "misc" or not labeled at all is a practical problem every time something trips or a circuit needs to be isolated. We trace and label circuits so the panel reflects what is actually connected. This is also useful before an inspection, before a renovation, or when a property is changing hands and the new owner needs to understand what they are working with.
Rental properties in St. Augustine range from older homes with original wiring to newer construction that has been modified over the years. A landlord who manages more than one unit needs work that gets done cleanly and does not come back as a repeat call. We scope the job on the phone, confirm what the visit will cover, and complete the work in one trip where the job allows.
Access with a tenant in place gets discussed before the visit. We confirm the scope, the timing, and what the tenant needs to know. After the work is done, you have a clear record of what was found and what was addressed. That matters when a tenant raises a concern later, and it matters when the property is inspected.
We take pride in the electrical work we leave behind, and that applies to a rental the same way it applies to a primary residence.
Small electrical problems have a way of staying small in the mind even when they are not. An outlet that has never worked gets ignored because the one next to it does. A switch that sparks gets written off as a quirk. An outside light that stopped working stays dark because it is not urgent enough to schedule.
The outlet that never worked might be on a tripped GFCI circuit somewhere else in the house. It might also be a loose connection that has been arcing quietly for months. The switch that sparks is not always a problem, but sparking that comes with a pop or a smell is a sign of a failing connection that gets worse under load. The outside light might be a dead bulb, or it might be a wiring fault in a wet location that has been slowly corroding.
None of these jobs is large. All of them are worth a call. The cost of a small fix now is not the same as the cost of what a neglected fault can become.
Wiring work is checked against code before sign-off, and that applies to the small jobs the same as the large ones.
A quote is arrived at on the phone. You describe the situation, we ask about the panel, the access, and the scope of the work, and you get a number before anything is booked. That number is the price for the job as described.
What can change it is what the job turns out to involve once work begins. A fault that turns out to sit behind a finished wall adds access time. An existing circuit that cannot carry a new load without an upgrade adds scope. A panel that needs to be brought up to current standards before new work can be added to it adds a step. None of those changes happen without a conversation first.
With a local company, a question about the work gets a straight answer. You call, you describe what you are dealing with, and you get a clear answer about what it involves and what it costs before you commit to anything.
The price is confirmed before the visit is scheduled.
Call (904) 289-4264 and ask what the job covers.
We serve St. Augustine and the communities around it, including Vilano Beach, St. Augustine South, St. Augustine Beach, St. Augustine Shores, and Butler Beach. If your address is in St. Johns County and you are not sure whether it falls within our area, call and ask. We confirm coverage on the call before anything else.
The work across all of these areas is the same: panel upgrades, repairs, outlets, lighting, dedicated circuits, generator hookups, surge protection, pool and spa wiring, and the full range of residential and commercial electrical work. Coverage does not change what we do or how we do it. Anybody planning ahead in St. Augustine can start with the page that lists our electrical services.
Hurricane season runs from June through November across this region, and lightning is a consistent hazard year-round. A generator hookup involves a transfer switch and a dedicated circuit from the panel, and the switch has to be installed correctly to keep utility and generator power from feeding each other. Whole-home surge protection installs at the panel and handles the large voltage spikes that a nearby lightning strike produces, which point-of-use strips are not rated for. Both are worth discussing on the call if you are thinking about either one.
After any remedial work, we test the circuits and outlets that were affected to confirm they are operating correctly. For GFCI and AFCI work, we verify that the protection trips and resets as it should. For panel work, we confirm that each circuit is correctly labeled and that the load is distributed properly before we leave.
Heat building up behind a faceplate usually means the connection at the receptacle or switch is loose, corroded, or carrying more current than the wiring can handle cleanly. Discoloration is often a sign that the problem has been developing for some time. Call as soon as you notice it rather than waiting.
St. Johns County has housing stock that spans several decades, and older homes sometimes carry panels or wiring that was never updated after the original installation. If the home has not had an electrical inspection in years, or if the panel was last replaced before modern appliance loads were common, a review is worth scheduling. We assess what is there and explain what needs attention before any work is proposed.
If a job has to stop before it is complete, we make the site safe before we leave. That means no exposed live conductors, no open panel enclosures, and a clear account of what has been done and what remains. We confirm the plan for completing the work before we leave the site.
Outlets and lighting in the same room are often on separate circuits, so a tripped breaker or a failed GFCI can take out the receptacles without affecting the fixtures. The first step is checking for a tripped GFCI outlet elsewhere on the same circuit, since one GFCI can protect several downstream outlets. If that does not restore power, the fault is somewhere in the wiring or at the breaker, and it is worth calling to have it traced.
We coordinate the timing with you at the time of booking. If another trade needs something from us before they can proceed, we factor that into the schedule. The key is knowing the sequence before the work starts so no trade is waiting on another unnecessarily.
You call, you describe the problem, and you get a price before anything is scheduled. We are available every day from 6:00 AM to 10:30 PM. No forms to fill out, no waiting for a callback.
Call now. Get on the schedule. Know what the work involves.
We also take electrical work in: World Golf Village, Nocatee, Palm Valley, Green Cove Springs.
Browse our map of areas.
Below is a plain-language look at the electrical services we handle for homes, rental properties, and businesses in St. Augustine and across St. Johns County. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If your situation does not fit neatly into a row, call and describe what is happening and we will scope it on the phone.
| Service | What It Covers | When You Need It | Things to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Panel replacement and subpanel installation, Load calculations before sizing, Grounding and bonding brought to current standards | Homes adding EV chargers, major appliances, or additions that exceed current panel capacity | Panel work is inspected to the code inspectors here enforce. We confirm the new equipment is sized correctly for the actual load before anything is installed. |
| Electrical Safety Inspections | Full wiring and panel assessment, GFCI and AFCI protection check, Grounding and bonding review, Pre-purchase inspection for older properties | Buyers evaluating an older home, landlords keeping rental properties current, or any homeowner who has not had a wiring review | An inspection before purchasing an older property tells you what the wiring looks like, what is working correctly, and what will need attention before or after closing. |
| Ceiling Fan Installation | Fan-rated box installation, Switch leg wiring for fan and light, Replacement of existing fixtures, New circuit runs where needed | Homeowners adding or replacing ceiling fans, especially where no existing wiring or rated box is in place | A standard light fixture box is not rated to support a fan. If the existing box is not fan-rated, we replace it before the fan goes up. |
Call (904) 289-4264 and describe what you are dealing with. A few minutes on the phone is usually enough to scope the job and give you a price before anything is booked.